If you require a long range wireless door bell (chime or pre-recorded message / sound) we have a variety of solutions available.
You will require 240v mains power at the gate (door bell location for guests) Alternatively solar solutions are available, however this will also increase the cost of the the project.
Within your home / office / warehouse a sound will be played each time the door bell is pressed.
If you require the door bell to sound in multiple locations just let us know when planning your project.
Case Studies:
1) LAPS was approached to provide a wireless door bell on a farm with a secure gate located 100m (open air) from the home. As part of the solution we were able to provide the door bell to ring in multiple locations (home and shed) At the gate location there was 240v power. Within the home and shed each receiver requires a power outlet 240v. The entire solution operates on 12vDC which is a low voltage solution.
2) Use a wireless transmitter & receiver to monitor activity on a door. For example, if you live in an apartment where your garage is located on a lower level and you don’t want to spend money on an alarm system, but you you would like to know if someone has opened the garage door illegally. We can place the wireless received in your unit (upstairs) and if the garage door is opened it will beep in your apartment to notify you of the event. If you plan on working in the garage, simply turn it off and this will silence any alarm.
Tell us about your project and hopefully we have a solution!
Advantages over a standard door bell available at your local hardware
- Long Range >100m (open air)
- Not Battery Powered
- Heavy Duty Design & Construction
- Suitable For Both Commercial & Residential Applications
- Optional Backlit Push Button
- Have Multiple Wireless Receivers Programmed to The Same Door (Ie: Downstairs, Upstairs or Rear Office) Easily Move Them Around As Required.